Last Updated: May 2, 2024

Services For Commercial and Residential properties.

 

Air Conditioning

A traditional home comfort system has two parts: an indoor unit, such as a furnace or air handler, and an outdoor unit. An air conditioner is the outdoor unit that cools air and sends it to the indoor unit for circulation through your home. Indoor and outdoor units are designed to work together. When the air conditioner is properly matched with a furnace or air handler, you get maximum efficiency and longer system life.

 

Furnaces

Furnaces heat and circulate warm air in the winter. Furnace heating ability is measured with an Annual Fuel Utilization Efficiency (AFUE) percentage. A higher AFUE percentage indicates a more efficient furnace.

 

Heating and Cooling Systems

In a packaged system, all equipment is built into an outdoor unit, usually on a concrete slab or other platform. The "package" that gives it its name provides central air conditioning during the summer and heat in colder months.

 

Thermostats

Thermostats are extremely important because they are your interface and control system for your heating and air conditioning equipment. This is the device that will give you the information on what the equipment is doing, when it needs to be serviced, and allows you to set the exact temperature and humidity you want to maintain in your home.

 

UV Air Purifiers

Ultraviolet air treatment systems kill mold that would grow in the cool, damp interiors of your air conditioning system. This is the same technology that's long been used by water treatment facilities, adapted for safe, efficient home air purifiers.

 

Air Handlers

A traditional home comfort system has two parts: an outdoor unit, such as an air conditioner or heat pump, and an indoor unit. The air handler is the indoor unit that circulates cool air through your home in the summer and warm air in the winter. The indoor and outdoor units are designed to work together. Air handlers supply conditioned air evenly throughout your home, when used in place of a furnace, with either an air conditioning or heat pump system.

 

Dehumidifiers

Dehumidification can be very important if you live in areas of high humidity. High humidity in cooler temperatures gives you a wet clammy feeling and in warmer temperatures causes a wet sticky feeling and causes perspiration to stay on your body and soak in to you clothes rather than evaporate.

High humidity can also cause mold & mildew through out the house and even ruin very expensive clothes, fabrics, paintings & wall coverings. All air-conditioning units take out some humidity when they are running but in very humid areas this is not enough and you need a dehumidifying system. This can take out up to 15 times more water from the air than a standard system with very little operating cost penalty.

 

Air Cleaners

Be sure your home's air is clear of dust, pollen, fungi, smoke and other particles too small to see. It's easy with a HEPA, Electronic or Media Air Cleaner. These cleaners provide stepped-up filtration, more effective than your furnace or air conditioner alone. In fact, these cleaners can remove up to 94 percent of the particles that pass through your home's system. And since these pollutants can build up as film on walls and furniture, this is performance you'll feel and see.

 

Evaporator Coils

A traditional home comfort system has two parts: an outdoor unit, such as an air conditioner or heat pump, and an indoor unit, such as a furnace or air handler. The evaporator coil is a series of piping connected to a furnace or air handler that blows indoor air across it, causing the coil to absorb heat from the air. The cooled air is then delivered to the house through ducting. The refrigerant then flows back to the compressor where the cycle starts over again.

Heating

Our Service team and our  engineering associates try to be familiar with each client facility so we can take a proactive approach to energy saving opportunities.

 

Ventilation

Efficient Heating, Cooling, and Ventilation and Air Quality systems are affected by the proper maintenance of your building’s air handling system. We perform routine preventative maintenance that will help alert businesses to possible air quality concerns, before they become serious.

 

Cooling

When you need cooling, your company depends on the performance of your air conditioning system. But keeping your air conditioning system in its original peak performance condition year after year demands preventative maintenance and small repairs as well as operational changes that can be made without extensive costs.

 

Energy Management

Energy Management Systems are becoming a must for well-run, energy efficient buildings. In addition to the set point and night-setback features which can be handled by a programmable thermostat, an Energy Controls System can provide savings in many other ways including functions such as lighting and water temperatures.

 

Preventative Maintenence

Preventive maintenance from Mechanical Services means peace of mind — delivered! We know that unnecessary equipment repairs can make a mess of the best business plans. Our preventive maintenance program can minimize surprises, lower your company’s energy costs, and extend the life of your equipment. Prevent problems before they occur.

 

Google Maps
Web Renewal